NARWAL T10 Mop Robot, Self-Emptying Vacuum Cleaning Robot Auto Mop Washing & Dry

• 🟣4-in-1 Automatic Sweep, Mop, Wash, and Dry: Say goodbye to the tedious manual work of mop washing and drying. Besides the sweeping work, Narwal mop robot will efficiently wash, rinse and dry your mops automatically. The unique mop system features self-cleaning technology so you never have a dirty mop. Powerful suction and a no-roll brush design to reduce the risk of hair tangling
• 🟣The Real Deep Cleaner: Few robot mops are deep cleaners considering the streaks left on the floor. Narwal does an excellent job at mopping with its revolutionary high-speed spinning mopping system. Bring out the spotless shine of your floors with this mopping robot. Vinyl, tile, laminate, hardwood floors, marble…Narwal will impress you by eliminating stains and wet spots in an instant
• 🟣No Need for Manual Washing and Drying: Free your hands and time from washing and drying the mop pads. This self-cleaning mopping robot periodically returns to its base station to clean its microfiber mops on its own. It knows when to wash the mop pads and dries them when cleaning is done. The built-in 5L(1.3 gallons) water tanks mean the mop robot t is able to clean 3000 ft²
• 🟣The Lowest Noise Ever & Lidar Navigation: The 45dB noise is lower than most robot vacuum mops, no disturb to pets and kids even at night. Thanks to the Lidar Navigation, Narwal features fast learning of the environment and optimizing cleaning routine instead of aimlessly spinning around. With multiple smart sensors, the robot mop avoids obstacles with ease and tackles tough terrain effortlessly
• 🟣Smart Mapping and No-Go Zones: Freely choose the room or area you want to clean, and set the cleaning sequence as well. This mopping robot also allows you to adjust vacuuming suction levels and mopping moisture levels. Define no-go zones to build virtual barriers for mopping or vacuuming as you wish. No-go zones can be stored for all future auto-scheduled runs
• 🟣Note: The supported network of Narwal T10 is 2.4G WiFi. However, since most routers support both 2.4G and 5G, in order to ensure the machine’s stability, it is recommended to switch to 2.4G WiFi when using the robot by following the instructions of your router setup

Mopping and sweeping are chores none of us really have time for, but are essential for good housekeeping.

It’s time to modernize the way we clean our floors. Just lay back, relax, and leave the work to Narwal.

The award-winning T10 Robot Mop and Vacuum crosses deep cleaning floors off your daily chore list.

While other robot mops have a small water reservoir plus a cloth that requires frequent removal for cleaning, Narwal’s unique mop system features self-cleaning technology.

That means you will never have a dirty mop. The robot will wash, rinse and dry the mops automatically.

30% More Mopping Area

More Efficient Clean

The unique triangle mop pads boast 30% more surface area and deliver more effective and seamless cleaning.

Superior Scrubbing Power

The 180 RPM high-speed spinning pads apply 10N pressure to the floor, much more powerful than manual power.

Q: How to connect the robot mop to WiFi/APP？

A: The supported network of Narwal T10 is 2.4G WiFi. However, since most routers support both 2.4G and 5G, in order to ensure the machine’s stability, it is recommended to switch to 2.4G WiFi when using the robot by following the instructions of your router setup.

Q: How much space do we need to place the base?

A: The dimension of the base is 15.79*14.09*16.81 inches. To ensure the robot’s performance, please place the base station against the wall, maintaining 20 inches(0.5m) on both sides, and 60 inches(1.5m) in front.

Q: Does Narwal T10 switch automatically between Mopping & Vacuuming?

A: In order to maximize the mopping performance and avoid dirt caused by the side brushes, the sweeping and mopping modes need to be switched manually, but the process is easy and super quick.

Q: Can this robot mop detect carpet and avoid mopping it?

A: It is recommended to set No-go zones considering the robot is unable to recognize carpets vs. other surfaces. Here are two ways suggested:

a. Use magnetic strips (included in the package) to set up no-go zones

b. Use the Narwal App to set up no-go zones

Q: What to do if the mop robot doesn’t work in the first place or stops working?

A: Please first check the error code and follow the instructions. If it is still not working, please let us know at any time.

Q: What to do if the base works but the robot doesn’t turn on or the battery won’t charge?

A: Please use a wet cloth and then a dry cloth to wipe the charging electrode of the robot. Then put the robot back in the base station and charge it for at least 5 hours. Then, see if the robot goes back to working normally. If the issue is still not solved, please let us know at any time.

Q: How to deal with error codes?

A: Please refer to the solution to the voice prompt and manual. If it still doesn’t work, please let us know at any time.

Q: What to do if the robot is not able to go back to the base?

A: Please try to map again to correct the map data error.(Note: During the map-building process, you can pause and push the robot through the place where the robot cannot go but please do not pick up the robot.) If it still doesn’t work, please let us know at any time.