Operation instruction:
1. Make sure that all valves between the gas container and the refrigerator are open.
2. Depress the safety device control (C) and hold it down while depressing the igniter switch (A) .
3. Check the flame indicator (B) to see whether the flame is alight.
4. Keep the safety device control (C) depressed for a further 10-15 seconds.
5. Release the safety device control (C ) and again check to see that the flame is alight.
6. Adjust the thermostat knob (D) to desired temperature setting and allow for 8 to 10 hours of operation to achieve desired temperature.
If the burner has not lit after 4-5 attempts, turn off the gas tap, wait 5 minutes and then try to re-light. If the burner still fails to light, please contact the authorised service provider in your area.
Note: If the battery ignition fails to spark, you might need to replace the battery(G).