Welcome to emarket!

BRANDINGS

My Cart -

$0.00
0
There are 0 item(s) in your cart
Subtotal: $0.00




BLUETTI EP500Pro 5100Wh 3000W Power Station Battery Backup MPPT Solar Generator

$3,298.90

SKU: DE15E107

Product Highlights

Buy Now
Choose your delivery location :

SKU DE15E107 Category
pnghq.com-credit-card-trust-badges-png-image-transparent

Description

  • [Home Power Backup] – EP500Pro power station comes with massive 5100Wh LiFePo4 cells and an amazing 3000W PSW inverter, offering secure and strong power for home use.
  • [17 Versatile Ports] – EP500Pro is equipped with a NEMA 14-30 Receptacle, RV Port, 15W wireless chargers, and other must-have ports like standard AC/18W USB-A/100W USB-C/DC 5521.
  • [Lightning Recharge] – EP500Pro supports dual charging by solar power and AC input to achieve a max input of 4000W, which allows EP500Pro to be fed up in less than 1.8 hours.
  • [Keep Data Safe] – The UPS solar generator can provide backup power when your regular power source fails, which allows a computer or connected equipment to be shut down safely and orderly.
  • [What You Get] – BLUETTI EP500Pro power station, AC charging cable, PV charging cable, user manual, 4-year warranty, and friendly local/online customer service.
  • Pay Attention:The EP500PRO cannot be connected to the Home Grid and Sub Panel.

📢 📢 📢Not sure how to choose the fittest power station? Use the Power Estimate Calculator.

FAQ

Q1: What devices can be charged/powered by EP500Pro?

A: With its 3000W AC inverter, this solar generator can power most of your appliances with the operating power under 3000W. (With an optional accessory P030A, its power can be expanded to 6000W.)

Q2: How long will EP500Pro power my device?

A: Working time (estimation) = 5100Wh * 0.85 / operating power of your device. (0.85=Conversion Rate) Kindly note the actual working time may vary under different circumstances.

Q3: What kind of solar panel should I choose?

A: The total Open Circuit Voltage should be between 12-150V. We recommend 4 – 6 * BLUETTI PV120 / PV200.

Q4: What should I do if my roof panels exceed the open-circuit voltage requirement?

A: You can reduce the open-circuit voltage by ordering a BLUETTI PV Voltage Step Down Module D300S to match the input requirements of EP500Pro.

DUAL-CORE CONTROLLER

  • ARM+DSP
  • TI dual-core processors C2000
  • Rapid & accurate sensing
  • Ultra-low latency
  • Real-time control

BLUETTI SELF-TEST CIRCUIT

  • High reliability and safety
  • Reduce the complexity
  • Increase the stability of the hardware and system

BMS PROTECTION SYSTEM

  • Over-current/Short-current protection
  • Over-charge/Over-discharge protection
  • Over/Under-voltage protection
  • Over/Under-temperature protection
  • Support pass-through charging

SPECIFICATION

Capacity 5100Wh
Battery Type LiFePO4 (6000+ Cycles to 80%)
AC Input 3000W Max.
Solar Input Voc 12-150V / 2400W Max. / 24A Max.
AC Output 4 x AC 100-120V, 1 x NEMA 14-30
DC Output 1 x 12V/30A DC, 1 x 12V Car, 2 x 12V DC5521
USB Output 2 x 100W PD, 2 x 36W, 2 x 5V/3A
Wireless Charging Pad 2 x 15W Max. (for each)
Charge Temperature 32℉-104℉
Discharge Temperature -4℉-104℉
Dimensions 22.8 × 11.8 × 29.9 inch
Weight 182 lbs
string(7) "default"




.

 




x